03-30-2017 10:06 AM
We have a Brocade 6547 embedded switch running on firmware version v7.4.1d and unable to create a user ID in switch and the error is
sqlite3_exec error: 13 database or disk is full
Failed to add user account
The other embedded switches running on same firmware are working fine and could not trace cause of this error.
03-30-2017 11:51 PM
Let us check the easy one first - is disk (flash) of the switch full or not - try and run the following command (do not need a Fabric Vision license), or you might have an issue with flash on the 6547
mapsSam --show flash
06-07-2017 12:45 AM
so you need to remove extra files on the flash, the following command
will remove any core files on the system. Notice that of course you will loose any old state / core on your system.
Then verify the state of the compact flash again with mapsam --show flash
10-04-2017 07:02 AM
We are unable to perform command "supportsave -R"
Error: No sufficient space available
As validated with help of support and Arcitect "hareboot" command cleared the flash to 56%