07-10-2018 06:08 AM
I want change my switch M5424 mode from Access Gateway to Native mode, I used this commande "ag --modedisable" but dose not working, error message appear “This operation is not supported on this platform”.
07-10-2018 06:31 AM
Thank you for your reply.
Yes, I have executed these commands but doesn't work
07-10-2018 07:05 AM
you post a webtools screen!!! for that reason i say to use CLI
again, do a login as "admin"
if this is not work, post the error output
what is the FOS release ?
07-10-2018 07:11 AM
sw01:admin> ag --modedisable
WARNING 1: Changing from Access Gateway mode to Switch mode will set zoning to "all access".
WARNING 2: Disabling agmode will remove all the configuration data on the switch
including N_Port configuration and F_Port to N_Port mapping. Please backup your
configuration using configupload.
This operation will reboot the switch.
Do you want to continue? (yes, y, no, n): [no] yes
This operation is not supported on this platform
and FOS release is 6.4.1a