For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎07-10-2018

This operation is not supported on this platform

Hi,
I want change my switch M5424 mode from Access Gateway to Native mode, I used this commande "ag --modedisable" but dose not working, error message appear This operation is not supported on this platform.
Thanks.

External Moderator
Posts: 5,470
Registered: ‎02-23-2004

Re: This operation is not supported on this platform

@Salah

 

be aware the operation is disruptive and any AG config will be lost.

 

do follow:

 

1)

 

switchdisable

 

2)

 

ag --modedisable

 

 

TechHelp24
Occasional Contributor
Posts: 5
Registered: ‎07-10-2018

Re: This operation is not supported on this platform

Thank you for your reply.
Yes, I have executed these commands but doesn't work

Spoiler
sw01:root> switchdisable
sw01:root> ag --modeshow
Access Gateway mode is enabled.
sw01:root> ag --modedisable

WARNING 1: Changing from Access Gateway mode to Switch mode will set zoning to "all access".

WARNING 2: Disabling agmode will remove all the configuration data on the switch
including N_Port configuration and F_Port to N_Port mapping. Please backup your
configuration using configupload.

This operation will reboot the switch.
Do you want to continue? (yes, y, no, n): [no] yes
This operation is not supported on this platform
sw01:root>

Thanks.

External Moderator
Posts: 5,470
Registered: ‎02-23-2004

Re: This operation is not supported on this platform

not as root.

 

you must do a login as admin

 

 

TechHelp24
Highlighted
Occasional Contributor
Posts: 5
Registered: ‎07-10-2018

Re: This operation is not supported on this platform

please i used admin with admin role but doesn't work, please which role i use ?

 

Thank you.

External Moderator
Posts: 5,470
Registered: ‎02-23-2004

Re: This operation is not supported on this platform

@Salah

 

no from a webtools

 

log as admin in the command line

 

 

TechHelp24
Occasional Contributor
Posts: 5
Registered: ‎07-10-2018

Re: This operation is not supported on this platform

Yes, I use a command line.

External Moderator
Posts: 5,470
Registered: ‎02-23-2004

Re: This operation is not supported on this platform

you post a webtools screen!!! for that reason i say to use CLI

 

again, do a login as "admin"

 

then

 

"switchdisable"

 

"ag --modedisable"

 

if this is not work, post the error output

 

what is the FOS release ?

 

 

 

 

TechHelp24
Occasional Contributor
Posts: 5
Registered: ‎07-10-2018

Re: This operation is not supported on this platform

sw01:admin> switchdisable
sw01:admin> ag --modedisable

WARNING 1: Changing from Access Gateway mode to Switch mode will set zoning to "all access".

WARNING 2: Disabling agmode will remove all the configuration data on the switch
including N_Port configuration and F_Port to N_Port mapping. Please backup your
configuration using configupload.

This operation will reboot the switch.
Do you want to continue? (yes, y, no, n): [no] yes
This operation is not supported on this platform
sw01:admin>

 

and FOS release is 6.4.1a

 

Thanks.

 

External Moderator
Posts: 5,470
Registered: ‎02-23-2004

Re: This operation is not supported on this platform

FOS 6.4 is indeed many years old, probable it was any bug / defect with this release.

 

I send a message, please see you Private Message

TechHelp24

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.