01-16-2014 01:30 PM
When running the SAN Health Check utility (SAN Health Version 3.2.7b) on windows 7 the scan is fairly quick but the encryption and compression phase of the report generation is painfully slow. Are there any optimization configurations on either Windows 7 OS or the SAN Health utility to speed up that part of the process?
01-16-2014 10:43 PM
Define painfully slow.
Have you already upgraded sanhealth.
On my system (i5 4GB w7 pro) with 7 fabrics and 16 switches in the set scanning takes about 7 mins or so (also slow WAN lines).
The encryption and compression phase is like 20 seconds.
Might be aided by the SSD though.
01-17-2014 06:56 AM
5 mintes for scan / data retrieval for (2) DCFM and (2 - 4) 5100s on a site.
20 - 25 minutes for encryption / encryption phase.
01-17-2014 08:18 AM
SAN Health utility was downloaded and installed a few days ago version 3.2.7b so to my knowledge is the latest version and nothing to update.
Windows 7 64 bit SP1
4 GB memory
(2) 2.59 GHz CPU
I am not certain of the size of the raw data set but the resulting report zip file is 2mb to 4mb in size. We directly upload the raw data file to Brocade over https for processing (which takes a second or two) so i dont have a local copy of the raw data. I will try saving a raw data copy next run to check on size. Is there anything besides text data in the raw data and resulting upload file? Even large text data set should set should compress and encrypt fairly quickly (at least it seems to me).
01-17-2014 11:50 AM
Hmm don't have an answer for you i guess.
I have a similar results sip file 2mb, and the only difference looks like it's the ssd.