05-23-2012 12:16 AM
Hi All, while i am trying to do zoning in brocade switch using DCFM Pro 10.4.5,the Zone DB is getting saved to offline repository. also i am not able to activate the zone config. My connection diagram is as follows brocade 300 -> cisco MDS 9222i -> cisco MDS 9222i -> brocade 300. FCIP tunnel created between cisco MDS. Both Brocade is in Interopmode 3 (McDATA open mode) and I am getting all these switches under single fabric in DCFM. i am able to create the zone and also able to map the wwn from 2 brocade switches to the zones , but not able to activate the zone. getting following message while applying the zone config "The Selected zone DB will be saved to the offline repository" Please help to activate the config.