For more details, please see ourCookie Policy.

Fibre Channel (SAN)

New Contributor
Posts: 5
Registered: ‎10-08-2003

Switchs Messages

Hi everybody...

Posts: 69
Registered: ‎09-16-2003

Re: Switchs Messages

These are Fabric Watch messages. It is just information messages that tells you you are using about 80% of the bandwidth on port 8. The Fabric Watch parameters can be changed if you need it.

Posts: 0

Re: Switchs Messages

SilkWorm-2800 is a 1 Gbit/sec switch supporting a maximum transfer rate of 100 MB/sec. If a fabric port consistently operates near this upper bandwidth limit, it may cause traffic congession and impact fabric performance. The Threshlods monitoring can be enabled/disabled and customized as per user environment from the Brocade Fabric Watch user interface.

Not applicable
Posts: 1
Registered: ‎08-21-2003

Re: Switchs Messages

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.