For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Contributor
Posts: 31
Registered: ‎10-23-2011

Setting up IPsec for FCIP

Hi,

Recently, when I tried to configure IPsec over FCIP, I noticed that I couldn't execute the command " policy –create type number "  It mentions " command not supported on this platform " When I check the license, I do have the 'High Performance Extension over FCIP/FC license' installed. Any idea? Thanks..

External Moderator
Posts: 5,435
Registered: ‎02-23-2004

Re: Setting up IPsec for FCIP

--->>> It mentions " command not supported on this platform "

Some command are Plattforms specific Command, and are not available for all Brocade Plattforms.

Now is a question, what kindof Plattform you try to execute the command ? 

TechHelp24
Contributor
Posts: 31
Registered: ‎10-23-2011

Re: Setting up IPsec for FCIP

Hi Techhelp,

The platform that I am using is the Brocade 7800 Series. I've checked the Fabric OS FCIP Administrator Guide and there's command associated with that for this platform. The Fabric OS version that I am running is v 6.4. Attached is the FCIP admin guide.

Contributor
Posts: 31
Registered: ‎10-23-2011

Re: Setting up IPsec for FCIP

Hi,

Any idea on the above issue? Thanks.

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.