Fibre Channel (SAN)

Reply
New Member
Posts: 1
Registered: ‎03-19-2018

SNMP swConnUnitPortStatExtentionTable empty

Hello.

 

I have a switch that is showing FEC errors on a port. I'm already monitoring the port, using SNMP, for errors. But it seems that when FEC is enabled, most errors are "caught" by FEC and not incremented? The problem is, the table that contains the FEC error counters (swConnUnitPortStatExtentionTable), contains no data. The objects are there, but they are all empty.

 

SW fw version: v8.0.1a

 

portstatsshow:

fec_cor_detected        358571
fec_uncor_detected      45589

 

SNMP getnext:

[1.3.6.1.4.1.1588.2.1.1.1.27.1.31.16.0.196.245.124.87.249.84.0.0.0.0.0.0.0.0.18] =
[1.3.6.1.4.1.1588.2.1.1.1.27.1.31.16.0.196.245.124.87.249.84.0.0.0.0.0.0.0.0.19] =
[1.3.6.1.4.1.1588.2.1.1.1.27.1.31.16.0.196.245.124.87.249.84.0.0.0.0.0.0.0.0.20] =
[1.3.6.1.4.1.1588.2.1.1.1.27.1.31.16.0.196.245.124.87.249.84.0.0.0.0.0.0.0.0.21] =

... all values are "null"

 

Is there anything I need to enable, to get this table populated with values?

 

Broadcom Moderator
Posts: 87
Registered: ‎03-29-2010

Re: SNMP swConnUnitPortStatExtentionTable empty

We're looking at this right now internally. The short answer is no, there's nothing you can do about it right now. Watch for some recommendations coming in the next month or so on these SNMP reporting errors. 

doc

Any and all information provided by me is for entertainment value and should not be relied upon as a guaranteed solution or warranty of mechantability. All systems and all networks are different and unique. If you have a concern about data loss, or network disconnection, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, Please mark it with the button at the bottom "Accept as solution".

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.