11-04-2015 11:18 PM - edited 11-04-2015 11:19 PM
I'd like to implement a new SAN topology. Kindly refer attachment for the design.
Old brocade 300 x2 (device name : SAN2 and SAN3)
These two separate brocade originally have it's own configuration (alias, zone..)
New brocade 300 x1 (device name : SAN1)
It have no configuration.
First I connect fibre channel from SAN2 to SAN1 . I saw the configuration on SAN2 have merge to SAN1.
When I connect fibre channel from SAN3 to SAN1 ,it would have the message "Port 3,zone conflict" on SAN3.
Should I clear the configuration on SAN3 and then connect to SAN1?
11-05-2015 12:16 AM
-->>These two separate brocade originally have it's own configuration (alias, zone..)
most probable switch2 and switch3 have different config and this is the reason why you get a conflict.
the easy way is to delete config.