04-01-2015 06:02 AM
we have a dual fabric cluster (fabric A and B) with edge-core topology.
The edge switches are bladecenter switches Brocade 5470 and Brocade 6547. The core switches are brocade 300 switches.
The zones are all 1:1 zones WWPN based.
The host OS are ESX 5.x , Linux (SLES), AIX, Windows w2k8.
Now we want to replace the brocade 300 core switches with brocade 6510 switches.
Our plan is the following:
- ensure same firmware versions at old and new core switches
- configure new core switches (IP, domain ID’s)
- ISL the new core switches to the old one
- move the ISLs to the edge switches and the connections to the storage servers one by one to the new core switches.
Is that a legal migration path if all the zones are WWPN based?
Must there be any precautions taken before moving the cables (e.g. disable port / enable port)?
04-10-2015 06:00 AM
It seems to be a good strategy.
How many Edge Switches ?
just ensure you have multipath installed and all paths LIVE/OPEN/HEALTHY on your hosts to prevent LoA to the LUNs.
Chek the architecture of the new core device, you have a great opportunity to populate your new core accordingly to the best practices ;)
Run a SanHealth before starting the migration, look for hang mem zones, check if the ISL fan in/out ratios are ok...
the hang mems is just to prevent a host is without its target, resulting in a lack of san redundancy.