For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 17
Registered: ‎02-13-2018

Re: ISL to be set-up with new Brocade switches


I have 6 x 48000 director with 4 blades @48 LW port each . Now i have 3 Datacenter and 2 x 4800 director at Site A & Site B and 2x Director at site C.
These switches will again form 2 fabrics. Each fabric contains 1 SAN switch from each DC interconnected by 4 * ISL’s using accounts own dark fibre network.
Directors are connected using a mesh topology with 4 x ISL’s between each director.

So could you help me how to configrue the ISL with new switches and configure them properly with steps.

Additional ISL’s may be required between Site A and site B for cross-DC SVC cluster .

Occasional Contributor
Posts: 17
Registered: ‎02-13-2018

Re: ISL to be set-up with new Brocade switches

Hi , Can someone help me with my requirement or provide some good links where new brocade switches and ISL set-up steps confiugration are provided with best practise.

Occasional Contributor
Posts: 17
Registered: ‎02-13-2018

Re: ISL to be set-up with new Brocade switches

Hi Antonio,

 

My ISL and Switch configure question is not related to SAN health diagnostic tool .

 

Its separate query apart from SAN health .

 

 

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.