10-30-2016 03:14 PM
I have a problem with 2005-R18 machine, it won't initialize and all the fc ports has amber lights on.
This is the error we encounter.
2016/10/23-22:43:06, [BL-1027], 160671, CHASSIS, CRITICAL, IBM_2005_R18,
Blade in slot 0 faulted, boot failed; status 0x0 0x30 0x30. - Error
10-30-2016 10:56 PM
I assume the switch is not longer under maintenance contract, I'm right ?
The 2005-R18 = 7500 technically is based on Brocade FR4-18i Blade with wich differed a few less Backplane Connectors.
The 7500 have inside a embedded CP with integrated Backplane, where the blade board is connected.
Back to you error message, did you get / follow other error excepted the BL-1027 ?
10-30-2016 11:45 PM
It's under maintenance. Here's the exact error we encounter.
2016/10/31-06:31:06, [BL-1027], 163019 CHASSIS, CRITICAL, IBM_2005_R18, Blade in slot 0 faulted, boot failed; status 0x0 0x30 0x30.
2016/10/31-06:31:06, [BL-1034], 163020, CHASSIS, ERROR, IBM _2005_R18, Switch set to faulty, rc=20015.
Let me also give you version.
Fabric OS: v6.4.3h
Made on: Wed Sep 30 20:53:24: 2015
Flash: Thu Oct 27 08:38:29 2016
10-31-2016 12:00 AM
->It's under maintenance.
BL-1034 from err message manuals say not action is required, but from you output the switch show as Faulty.
at this point I would suggest to Open a TAC with Brocade or you OEM supplier.
09-25-2017 02:12 AM
do we speak about the 7500 or the blade Fr4-18i in a chassis?