06-23-2015 07:35 AM
I'm planning to upgrade Fabric OS from v6.3.2b to 7.3
I understand this is a stepped upgrade but do I need to confirm my server HBAs are compatable with this newer version of FOS before upgrading?
If so, where do I find a list/matrix of compatable HBA firmware and multipathing software?
Is there anything else I need to check compatability before starting the upgrades?
06-24-2015 03:42 AM
This is a very conflicting point.
I'll not say excatly what you should do, because each one has its own method.
I will say what I do, ok?
1 - determine if your equipment supports FOS 7.3: look for Brocade Fabric OS release Notes FOS 7.3 and check supported models
2 - stabilish the target path: for non disruptive upgrade, you need to do the upgrade in steps > 6.3.2b > 6.4.x > 7.0.x > 7.1.x > 7.2.x > 7.3.x . Look for a document called brocade target path in this community
3 - Once stabilished the target path, I like to have in hand all FOS release notes for the intermediary versions. I use to make a brief search looking for the words "upgrade and firmwaredownload" and check if ther is some defect related to it.
4 - Check the compatibility of the Target FOS version with my storages Microcode . Usually I ask for the vendors trhough a support ticket, but for the big storage players (i.e EMC/IBM/HDS) , there is a lot of documentation available.
5 - Do the Upgrade.
Note that I dont look into multipath/driver of the servers, because this remains in the storage-to-server interop matrix. Keep in mind that Brocade always add functions and features and it is very rare the situations where a new firmware caused an unexpected behavior in the servers (apart known defects, i.e in the 6.3.0c RSCN defect)
06-26-2015 07:11 AM