For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Highlighted
Contributor
Posts: 62
Registered: ‎10-02-2017
Accepted Solution

Not see WWN in Storage Hitachi G400 with SAN Brocade

Hello guys,

 

I have the next problem,

 

I check Zone between Host and Storage and is ok, and check fcping with WWN host and WWN storage is ok, port in the switch are online, but when login in Hitachi G400 console and try find the WWN host i do not see in any of the storage port zoned.

 

any idea?

 

Thanks for your help.

 

 

Frequent Contributor
Posts: 77
Registered: ‎01-19-2018

Re: Not see WWN in Storage Hitachi G400 with SAN Brocade

Did you enable the LUN security on the Gx00 port in question?
Contributor
Posts: 62
Registered: ‎10-02-2017

Re: Not see WWN in Storage Hitachi G400 with SAN Brocade

Hello Alexey,

 

 

 Yes is enable i have more host and lun created, but i find the solution, i register the host and WWN manually in the hitachi 400 and then de wwn host log in, and disable/enable port in switch san.

 

However is rare becuase it should be automatic.

 

Regards-

Frequent Contributor
Posts: 147
Registered: ‎04-04-2018

Re: Not see WWN in Storage Hitachi G400 with SAN Brocade

[ Edited ]

Hello,

I always notice behaviour on Hitachi arrays that on som OS, the WWNs not register in to the array automatically.
Rescan of HBA adapters or disable/enable ports always help.

Please mark this response as "Accept as Solution" if it answers your question.

Marian Bezeg

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.