For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Highlighted
New Contributor
Posts: 3
Registered: ‎12-22-2008
Accepted Solution

NodeSymb information from nslookup

I noticed that on my Brocade FC switches I can gather information like:

HG620A_01:FID128:admin> nsshow | grep -i emulex | grep -i 1205

    NodeSymb: [83] "Emulex HP-LPe1205A FV2.03X6 DV11.2.247.0 HN:neo3esx07 OS:VMware ESXi 6.0.0"

 

In this case it looks as if the FV indicates the adapter firmware version and the DV indicates the boot image firmware version. I

                The Emulex HP-LPe1205A is running adapter firmware version 2.03X6 with boot firmware version 11.2.247.0 on the host named neo3esx07.

 

Is this interpretation correct?

 

I am working on verifying that all the systems are running the appropriate version of firmware. Can this reliably be used to determine which adapters need upgrades?

 

I imagine that this information is passed to the name server if the operating system driver supports that functionality.

 

Howard Jares

Regular Contributor
Posts: 207
Registered: ‎04-04-2018

Re: NodeSymb information from nslookup

Hello,

you're right FV is for firmware and DV is for driver.
HN: is a hostname of server.

You will see this info only for devices with FDMI enabled/supported. You may try command bellow to display info from DB.

fdmishow

Please mark this response as "Accept as Solution" if it answers your question.

Marian Bezeg

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.