For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
New Member
Posts: 1
Registered: ‎02-07-2018

Need some help with legacy FC hardware

I have  some older LSI-CTS2600 drive arrays.

 

I want to use them as raid arrays on CCTV systems.

 

My DVR's are typically Dell Optiplex PC's such as Optiplex 990 or newer running Windows 7 Pro or Windows 10 Pro.

 

I am looking to find away to use these FC drive arrays as Raid Arrays, I prefer not software arraid as thai will slow down the processors.

 

Is there a HBA card I can purchase that will perform the hardware raid (must be PCI cards) or and external hardware raid controller you could recommend that I can place between the PC and the drive arrays.

 

The arrays will contian 1TB to 4TB sata drives.

 

Any help woruld be appreciated.

 

Thanks, Ken

External Moderator
Posts: 5,435
Registered: ‎02-23-2004

Re: Need some help with legacy FC hardware

@happygo

 

first at all, you are here in the wrong community.

 

you are looking here indeed for a Vintage Solutions.

 

Brocade - in the past and present - has never offer such PCI or external RAID Controller.

 

Such a Technology was in the past offered from ICP Vortex; Mylex; Adaptec / DPT.

 

All this solution was supported with Windows NT Server 3,51 and 4.0 , and Windows 2000 Server, till year +/- 2000, at this Time Seagete offered 80 and 146 GB FC Driver !!!, such PCI Controller support max. a entire LUN / Volume of 2TB,   where external RAID Support max. 512 GB 

 

additional such old hardware are not supported on Win 7 and Win 10.

 

 

 

 

 

TechHelp24

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.