03-03-2014 06:46 AM
I have 2 Brocade 300s and 2 BES that I want to merge into 2 fabrics. The domain id on BR300s is 1 and on the BES it is 2.
If I create the ISL links, at what point does it attempt to merge the zoning cfg files?
I do not want to get this wrong!
03-05-2014 02:55 AM
Thanks for the response.
The steps: -
Connect fibre between BR3 (domain 1) and BES1 (domain 3)
Enable ports for trunking.
What happens at this point?
There is a cfg file on both so what happens when it attempts to merge - does it prompt us and report any issues such as duplicate zones/aliases.
This is the scary bit as we don’t know what will happen and we have a number of business critical servers that we can’t afford to lose access to the luns.
03-05-2014 01:24 PM
In order to merge 2 fabrics, there are several rules that should be kept:
1. Domain id and switch name of all switchies have to be different and unique.
2. Those parameters have to be the same (if you never changed it, and kept defaults values- you at the safe side):
• Data field size
• Sequence level switching
• Disable device probing
• Suppress class F traffic
• Per-frame route priority
• BB credit
• PID format
3. Effective zone configuration should be the same, or one of them has to be empty or without affective configuration.
Moreover, you can see all zoning scenarios at any "FOS admin guide" under "Zone merging scenarios" table.
Anyway, if all rules are met- the fabrics will merge.
If something gets wrong- the fabrics won't merge, and will appear as "segmented", but any damage should not occur.
04-08-2014 03:17 AM
Sorry about slow response but I was busy elsewhere.
I will perform the merge next month with some assistance from a Brocade guy.
I will keep your notes close to hand in the planning.