For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Contributor
Posts: 46
Registered: ‎06-04-2012

LDAP issue on Brocade 200

Hi Friends,


I am configuring LDAP on multiple switches in our environment. I did configure on most of Brocade switches. So far we have the below models and thier FOS


Brocade 200 - FOS 6.2.2g (this is EOL, hence we could upgrade to max 6.2.2g)

Brocade 300, 5100,5300,6505,6520,DCX --> FOS 7.4.1e


Except on Brocade 200 switches, rest all switches the LDAP auth was successful. I believe since this (Brocade 200) being an old switch, there might be some other workaround. The LDAP settings output are as below;


SAN-2:user1> aaaconfig --show
RADIUS CONFIGURATIONS
=====================
RADIUS configuration does not exist.

LDAP CONFIGURATIONS
===================

Position                 : 1
Server                   : 20.10.10.10
Port                     : 389
Domain                   : abc.xyz.com
Timeout(s)               : 3

TACACS+ CONFIGURATIONS
=====================
TACACS+ configuration does not exist.

Primary AAA Service: LDAP
Secondary AAA Service: Switch database


SAN-2:user1> ldapcfg --show
        LDAP Role       |       Switch Role
------------------------------------------------
        ABC-ABC_SAN_Group      |       admin
------------------------------------------------

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.