12-22-2009 04:41 PM
We have recently added a IBM 2499-192 (Brocade DCX4-S) to our fabrics. We configured the IBM with 2 Logical Switches and merge each logical switch to the fabrics successfully.
When I go to do a zone change from the IBM 2499 switch the only options available to me under Ports & Attached Devices is the IBM switch. We have given it a domain id that is not in use on any other switch in our enviroment.
If I putty into the switch and run the fabricshow command it lists the zones as I would expect.
If I open Zone Admin from one of our other fabric switches and open Ports & Attached Devices I see all the domain id's including the IBM 2499.
I have attached screenshots of what I see as a reference.
virtual_switch_zone.jpg is the zone admin from the IBM 2499
physical_switch_zone.jpg is the zone admin from a 32 port switch