06-09-2015 04:21 AM
First of all your driver of the HBA, lets the hba attempt top log in as a loop port, that needs to be changed to fc-fc or point-to- point connection.
Second your switch port is not set to G-port.
Initially when an initiator logs in, it tries to login as loop, if that times out it tries, E-port then F-port. But since your hba driver is set to loop it logs in as loop.
You can force the switch port to G-port, which will stop the initiator of login in as a L-port, and tries immediately E or F-port.
Command would be: for example:
portcfggport 1/3, 1
06-09-2015 08:32 AM
Thanks for your reply.
It seems that the problem is in the conf of the hba that is set to loop. I am waiting the Unix´ support answer.
06-10-2015 10:16 PM
There may be other reasons. See here: http://www.erwinvanlonden.net/2015/05/port-stuck-in-l-port-mode/