02-22-2010 04:25 AM
We have recently upgraded all our switches in Fabric OS 6.2.2a.
We also configured VF on theses switches
Since we have some disk missing !
How I can find if a slow device is connected ?
Someone have got a workaround ?
Thanks for your help.
02-23-2010 08:56 AM
>>> Since we have some disk missing !
Is the array/firmware supported and qualified by FOS 6.2.2a ?
>>> How I can find if a slow device is connected ?
what they mean with slow devices?
02-23-2010 09:54 AM
I want say : Slow drain device !
And yes the firmware is supported and validated (between the storage and the backbone)
I will explain a bit more tomorrow because I should see better
In fact, we see a problem with our 48-port blades....
See you later ...
02-25-2010 04:22 AM
What problem do you see due to the slow drain device?? I'm trying to figure out how one could find a slow drain device in 6.2.. Brocade had helped us find this from multiple supportsaves collected over time.
In 6.3 there are new features to turn on bottleneck detection. This is specifically targetted at this task.
Slow drain devices are usually - storage ports with high fan out ratio. For example we had a storage port with 50 hosts on it, sounds crazy but blame our predecessors.
Slow drain devices can also be ISL's with depleted buffers.
So check for a large depletion of BB credits on any suspected ports and do this over a period of time.
I will inform u if I find a specific procedure with commands.