02-13-2008 08:58 AM
->>> I am expecting a pair of DB9 to SFP cables from cables.com. When they arrive I would like to connect the array to the two switches, and the host to the two switches via fiber optic LC/LC cables.<BR><BR>1) DB9 to SFP cable, are Copper cable, and Copper SFP my knowledge is not supported in the DS-32M<BR><BR>->>> 3. Cannot connect to the web server via RJ45 port. I can ping the switch to it's local IP, but when I try to connect via browser I get HTTP 400, bad request.3) Do you hhave the correct "Administrator" password ? by Standard is this "password"
02-13-2008 10:09 AM
I set the IP using the ipconfig command via COM, so I think it's correct. This is validated by the fact that telnet works fine, no?Can someone confirm that the DS-32M has problems with copper SFP? If that doesn't work, what are my choices in connecting the Dell 660f, which has only DB9 copper out, to the switch?
02-20-2008 08:03 AM
By 4xxx Series, 6064 and 6140 will be resettes the complte NVRAM to Factroryu default. with other word, all license will be resetted.by the 3032, sincerily.... i am not sure
02-21-2008 10:13 PM
Before I try anything I would like to understand what resetting the license might do. Let's say the switch has 32 ports and the minimum configuration one can buy is with 8 active ports. Before the reset all 32 ports are activated.Thanks in advance!