For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎04-09-2016
Accepted Solution

Help: How to send test MAPS snmp trap.

Does someone know how to send a test MAPS snmp trap?

External Moderator
Posts: 5,467
Registered: ‎02-23-2004

Re: Help: How to send test MAPS snmp trap.

hu_bj,

 

there is no way ( or better to say is unknown to me ) to send test MAPS trap

 

try first follow to verify if sendmail is configured correct,

 

log as root and executed the command

 

echo "test" |sendmail -v "email_address"

 

now you can i.e. try to unplug a cable or whatever on the switch, and you should get a message via MAPS.

TechHelp24
Valued Contributor
Posts: 559
Registered: ‎03-20-2011

Re: Help: How to send test MAPS snmp trap.

I can confirm that power cable is the best tool to send SNMP traps.
New Contributor
Posts: 2
Registered: ‎04-09-2016

Re: Help: How to send test MAPS snmp trap.

Thank you for advise, I was searching and coud not find anything. I wanted to test it without impacting anything production. Meantime I got some traps which confirmed all seems configured correctly. Would be nice to have this option in future FOS version :), when there is an option to send normal test snmp trap. Thanks again.

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.