Fibre Channel (SAN)

Reply
Occasional Visitor
Posts: 1
Registered: ‎05-01-2018

Fabric Login failed zero/duplicate AL_PA

We see the below mentioned message on M6505 where the mapping was working fine before.

 

   9   9   010900   cu    N16      In_Sync     FC  Disabled (Fabric Login failed zero/duplicate AL_PA)

 

BRCD01:admin> ag --mapshow
N_Port Configured_F_Ports Static_F_Ports Current_F_Ports Failover Failback PG_ID PG_Name
------------------------------------------------------------------------------------------------
0 15;16 None 15;16 1 1 0 pg0
17 None None None 1 1 0 pg0
18 1;3;4 None 1;3;4 1 1 0 pg0
19 5;6 None 5;6 1 1 0 pg0
20 7;8 None 7;8 1 1 0 pg0
21 9;10 None None 1 1 0 pg0
22 11;12 None 11;12 1 1 0 pg0
23 13;14 None 13;14 1 1 0 pg0
------------------------------------------------------------------------------------------------

 

When we tried to delete mapping using "ag --mapdel"  FPort 1 & 2 from NPort 17 and map them to NPort 18 it works fine. But when tried to map them again to NPort 17 it doesn't work and shows "FC  Disabled (Fabric Login failed zero/duplicate AL_PA)".

 

Please help on this issue. Many thanks.

 

Best regards,

Vignesh S

Broadcom Moderator
Posts: 87
Registered: ‎03-29-2010

Re: Fabric Login failed zero/duplicate AL_PA

You really haven't provided enough info to work through this. A quick idea, just guessing would be to start with this;

 

ag --deletepwwnfromdb PWWN

 

ag --clearalpamap F_Port

 

Then try again. Also we need to have some more data from the switch. Would like to know what the failbackshow output looks like. 

doc

Any and all information provided by me is for entertainment value and should not be relied upon as a guaranteed solution or warranty of mechantability. All systems and all networks are different and unique. If you have a concern about data loss, or network disconnection, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, Please mark it with the button at the bottom "Accept as solution".

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.