09-23-2015 12:59 PM
I have configured the FW in my environment . I have updated the thresholds for Port/SFP/ENV etc Classess and configured the SMTP server using fwmailcfg command . I am able to send the Test email but I am not getting email alerts for error .
Please let me know what I am missing .
Thanks in advacne .
Solved! Go to Solution.
09-24-2015 12:23 AM
I have perfromed the switch disable and enable activity but still there was no alert . Even when I am checking in the errdum output there are lot of errors above the threshold but still I am not getting any email alert .
09-24-2015 03:51 AM
--->>>I have perfromed the switch disable and enable activity but still there was no alert .
when you as admin or root force the switch in disable mode "switchdisable", as per my opinion this is not a issue, because as mentioned the command was performed as admin, and at this point and for this reason you don't get any Alert.
09-24-2015 05:38 AM
- Power Off ONE PowerSupply
another simple test
- insert a defective SFP
and finally a most simple Test
try to do a login as admin with wrong Paswword
username = admin
password = whatever
if the threshold value are configured correct you should get email alert.