For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎10-16-2017
Accepted Solution

Export config from Brocade 200 to Brocade 6505

Hi all.

 

It is possible to export the configuration of a brocade 200 [Fabric OS 6.2] to a  brocade 6505 [Fabric OS 7.4] ?

what's the best way to do it?

Thanks.

 

Broadcom Moderator
Posts: 415
Registered: ‎08-31-2009

Re: Export config from Brocade 200 to Brocade 6505

Hello,

 

The recommendation is to not doing configupload/configdownload but to adapt the configuration with the model used by doing screen capture of the configuration: ports, IP addresses, snmp... and then to implement to the other switch.

 

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
New Contributor
Posts: 3
Registered: ‎10-16-2017

Re: Export config from Brocade 200 to Brocade 6505

Thanks Thierry

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.