For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎04-19-2004

Enabling SNMP on Brocade Switches

What are the fields that should be set using the agtcfgSet command that will forward traps to a destination IP address?

Frequent Contributor
Posts: 78
Registered: ‎12-23-2005

Re: Enabling SNMP on Brocade Switches

The main fields are as follows:Community 4-6 (ro): choose one or multiple of these 3, the community name will get sent along with the traps to the specified ip address

Occasional Contributor
Posts: 5
Registered: ‎04-19-2004

Re: Enabling SNMP on Brocade Switches

If I set the Trap Level = 3 - Warning, does that mean I get everything below it; 2 = Error, 1 = Critical?I need at a minimum the Critical events, but would like to see the Error events also.....

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.