02-04-2013 01:58 AM
I have some ports on SAN768b switch with NPIV config.
When I run switchshow, the only information that I can get is:
|13||1 13 03fc80 id||N4 Online||FC F-Port 1 N Port + 4 NPIV public|
We have a performance issue with VMWare, and I can't identify which port these servers are connected. The only information is the zone (where I can identify the WWNs)
Is there any way to discover the WWNs of these HBAs?
02-04-2013 03:54 AM
portLoginShow shows all WWNs logged into fabric on a given physical port.
If you know device WWN you can further identify it with nodeFind command.
nsZoneMember might tell you with what other devices your host WWN can communicate.
Hope this helps,
02-05-2013 12:33 PM
We do a ton of NPIV and the best way that I have found to ID the port is using DCFM/BNA. Easy way here is to right click on the switch in DCFM/BNA and click on performance monitor/ real time graph. Look for your NPIV WWN and you will see the actual port number above it. Hope this helps