11-20-2014 07:07 AM
I have a fabric with 3 Brocade[DCX] switches and 2 McData[ED-140] switches operating in McData Open Fabric.
InteropMode: McDATA Open Fabric ( IM3 )
Domain Id offset: 0x60
At this time i would like to decom only one of the two McData switches. Will the below changes suffice?
Will the above steps suffice? Kindly let me know and thanks for the help.
11-20-2014 08:38 AM
It seems like a good procedure.
If the McData switch is empty - it's good enough.
If the McData switch contain devices/storage - just check if those devices not contacting any devices in the fabric.
11-20-2014 10:01 AM
Thanks for the response.
At this time we've migrated/replaced all the cables to the DCX's so yes there are no activly connected devices to the switches.
All thats left are the ISL's which I am to get rid off and isolate the to-be-gone McData switch out of the fabric.
I'll only be disabling the ports on the McData.