For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎05-07-2018

Core upgrade

We have a core edge configuration with redundant SAN's.  I want to replace our core 5300 switches with new SN6600B switches.  We have 3 edge switches for each SAN.  All of our equipment is running 7.3.2b FOS.  All zoning is 1 to 1 wwn mapping.  I have been unable to find documenation on the right way to migrate our switches to new hardware.  Everything is managed via BNA pro 14.2.2 if that matters at all.

Regular Contributor
Posts: 207
Registered: ‎04-04-2018

Re: Core upgrade

Hello,

 

Its depends on lot of things,..

 

Do you have FC routing in place?

Do you want to perform action online ? or you want to replace whole switch at same time ?

 

If not than you only need to configure switches, connect it to the particular fabric and then recable it cable by cable..

Please mark this response as "Accept as Solution" if it answers your question.

Marian Bezeg

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.