10-28-2005 05:40 AM
I am attempting to connect the serial ports of my Brocade 3900 switches, to a Lantronix Secure Console Server. Using the Brocade supplied serial cables as a starting point, I have not found a combination of cables and crossovers that will allow my serial connections to work. They work fine when connected to my laptop's serial connection.
02-06-2007 06:35 AM
I'm having the exact same issues with our 48000 serial ports. Hyperterm works fine, but when I try to connect via our console switch I get nothing. If someone from Brocade is on here, could you help us find an answer to this? thanks!
02-06-2007 10:27 AM
Kirk, I got my directors working on our console switch today. Ended up being the default mode on the ports were set to dce. Brocade serial ports seems to need them set to dte. You should be able to use stty cmd on your console switch to change --mode=dte and try again.
02-08-2007 07:06 AM
Thanks so much for figuring this out and sharing it. I won't be able to test this out until sometime next week, but I appreciate the information very much.Kirk
01-15-2013 12:47 AM
I have a Brocade 48000 Director , Please advise what kind of cable i need to use to the console port to connect my switch to pearl module , As i was using IO LAN 48CM Rolled cable to connect my CISCO switch is that the same cable can be used here ???