05-07-2012 02:08 PM
We have DCX backbone with 3 VF: 128 (ds), 125 (open), 126 (FICON)
I had some network problems, so I deleted IP address from logical switch by the command:
ipaddrset -ls 125 --delete
When I wanted to re-configure the same IP again, I used the command:
DCX_MTF_OPEN:FID125:admin> ipaddrset -ls 125 --add 10.18.185.105/24
and the output was:
address is being changed...
Address change failed: internal error (19)
As I can see, the IP hasn't changed.
When I checked the errdump- it seems like everything is fine:
DCX_MTF_OPEN:FID125:admin> 2012/05/07-16:54:02, , 12044, SLOT 7 | CHASSIS, INFO, DCX_MTF, SW/3 IP-FC/3 IPv4 manual10.18.185.105/24 DHCP Off
2012/05/07-16:54:02, , 12045, SLOT 6 | CHASSIS, INFO, DCX_MTF, SW/3 IP-FC/3 IPv4 manual none/none DHCP Off
The IPAD-1000 code refers to information that user manually tried to change IP address.
FOS version is 6.4.2a.
Are you have any ideas??