For more details, please see ourCookie Policy.

Fibre Channel (SAN)

New Contributor
Posts: 4
Registered: ‎09-26-2007
Accepted Solution

Cisco UCS - brocade connectivity

am having issues getting my cisco UCS servers to san boot off of my EMC VMAX storage array


the UCS chassis connects to a pair of Brocade 5100 FC switches which in turn connect to the VMAX


the WWNs of the UCS server are visible on the brocades, but show up as NPIV unknown (initiators/target)


any ideas ?

New Contributor
Posts: 4
Registered: ‎09-26-2007

Re: Cisco UCS - brocade connectivity

this is all set 


not a brocade issue


had to change the boot mode on UCS from UEFI to Legacy

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.