02-05-2013 11:23 AM
I'm configuring a Brocade DCX with Virtual Fabric and SNMPv1 and can not see the ports in the SNMP server (CA Spectrum).
Question: Is it possible to configure SNMPv1 with Virtual Fabric enviroment?
02-06-2013 03:16 AM
Yes, there should not be any problem in configuring it. Check The MIBs installed in the snmp server in case there could be a missing one.
With the following commands you cna check the current snmp settings on the switchs.
snmpconfig --show snmpv1
snmpconfig --show accesscontrol
snmpconfig --show mibcapability