08-11-2010 09:29 PM
Indicate Hardware Error, Compact Flash error, memory error or OS Error , and can caused a Dump.
Run supportftp and supportsave command.
make sure if a dump file is available and remove it.
08-12-2010 06:47 AM
2010/08/12-00:43:36, , 3402,, INFO, HNDL_1SW_Low, Slot 1 state has changed to FW_FRU_ABSENT.
Was there any planned activity such as removal of blades etc. This event usually occurs when you remove the blade. This seems to have caused a series of checks and failures.
08-12-2010 09:03 AM
2010/08/12-00:03:04, , 3337,, ERROR, SilkWorm48000, Slot 1 set to faulty, rc=2001c.
2010/08/12-00:03:08, , 3338,, WARNING, SilkWorm48000, Sensor values for Slot 1: Temperature 1 = 30 C 1.5V ASIC = 0.00 V 12V = 0.25 V 5V = 4.89 V 3.3V = 0.77 V 2.1V ASIC = 0.04 V 1.8/1.2V ASIC = 0.38 V.
2010/08/12-00:03:08, , 3339,, WARNING, SilkWorm48000, Sensor values for Slot 1: 3.3V = 0.00 V .
2010/08/12-00:03:08, , 3340, FFDC, CRITICAL, SilkWorm48000, Slot 1 powered down unexpectedly.
2010/08/12-00:03:08, , 3341,, INFO, SilkWorm48000, First failure data capture (FFDC) event occurred.
2010/08/12-00:03:15, , 3342,, WARNING, HNDL_1SW_Low, Switch status changed from HEALTHY to MARGINAL.
2010/08/12-00:03:15, , 3343,, WARNING, HNDL_1SW_Low, Switch status change contributing factor Blade: 1 blade failures (1).
These are a series of errors on the supportshow.
Pls run the cmnd tempshow, psshow, switchstatusshow,hashow, slotshow
slot 1 blade failure . contact your SW vendor asap. collect supportsave. They will ask you to collect some output through root login.