09-25-2017 03:52 AM
Protocol (scp, ftp, sftp, local) [ftp]: SFTP
Do you want to continue with CRA (Y/N) [N]:
Server Name or IP Address [host]: 10.10.10.10
User Name [user]: admin
Path/Filename [<home dir>/config.txt]: config.cfg
Section (all|chassis|switch [all]):
*** CAUTION ***
This command is used to download a backed-up configuration
for a specific switch. If using a file from a different
switch, this file's configuration settings will override
any current switch settings. Downloading a configuration
file, which was uploaded from a different type of switch,
may cause this switch to fail.
A switch reboot is required for the changes to take effect.
Please reboot the system for the configuration to be effective
configDownload operation may take several minutes
to complete for large files.
Do you want to continue [y/n]: y
Process function of configdownload failed for filter "secconfigs"
Solved! Go to Solution.
09-25-2017 04:18 AM
you are on 8.0.x, exactly which version, please?
From which version is your config.txt file?
Can you check if you have a root.access field in the config file without an value
grep root.access config.txt
if yes, ensure that the value is none, all or consoleonly by editing the file (for example)
Or try to run rootaccess to legal value before running configuploaded and download again
09-25-2017 04:39 AM
First of all Thank you for your quick response.
The switch firmware version is v8.1.0b
The config file is of same version as above
Yes the root.access field was empty as mentioned here:
After adding value "all", i was able to restore switch config.
Thank you again,