For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎11-23-2017

Brocade DCX 8510-8 FOS 7.4.1b temperature high on sensor ID 31 and 35

Hi All,

 

Brocade DCX 8510-8 FOS 7.4.1b  temperature high on sensor ID  31 and 35  . 

 

is there any way to set  the threshold alert/email alert  in switch using maps or BNA ?

 

 

sensor 31: (Temperature) is Ok, value is 54 C
sensor 32: (Temperature) is Ok, value is 49 C
sensor 33: (Temperature) is Ok, value is 46 C
sensor 34: (Temperature) is Ok, value is 31 C
sensor 35: (Temperature) is Ok, value is 54 C

 

 

External Moderator
Posts: 5,478
Registered: ‎02-23-2004

Re: Brocade DCX 8510-8 FOS 7.4.1b temperature high on sensor ID 31 and 35

@rdprrao

 

see in MAPS Admin Guide for BAD_TEMP, you can set as Marginal or Critical

 

keep in mind, temperature can may vary depend of type of Blade, but accordly your output temp is in range.

TechHelp24
Occasional Contributor
Posts: 5
Registered: ‎11-23-2017

Re: Brocade DCX 8510-8 FOS 7.4.1b temperature high on sensor ID 31 and 35

@Antonio Bongiorno TechHelp24 

 

Thanks , yes as of now temparature is normal if temparature is reached 69C only we got alert .

 

is there any way to set alert when the temparature will reach the value is  60C?

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.