05-20-2015 10:22 PM - edited 05-20-2015 10:22 PM
We have an "old" Brocade 300 switch that is not booting anymore. This device isn't under maintenance anymore, but we would like to use it in a lab. After a power outage, it won't boot anymore. The system status led stays orange and that the output we have when booting with console connected:
The system is coming up, please wait...
U-Boot 1.1.3 (May 16 2013 - 16:48:41)
CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
No Security/Kasumi support
I2C boot EEPROM enabled
Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
Internal PCI arbiter enabled, PCI async ext clock used
32 kB I-Cache 32 kB D-Cache
DRAM: Initializing DDRSDRAM
DDR Init: speed = 132000002
DQS calibration - Window detected:
max_passing_cases = 54
wr_dqs_shift = 95
dll_dqs_delay_X = 30
dll_dqs_delay_X window = 4 - 57
ECC Enabling DONE
POST RAM test disabled.
It will not go further.
05-21-2015 06:07 PM
I think you're out a luck and the onboard flash-drive is broke. It therefore is unable to boot the OS and FOS.
Not much you can do I guess.