Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 17
Registered: ‎08-18-2017

Active / Standby configuration on brocade 300

I have two brocade 300 switches in Active / Active mode, i want to make it Active / Standby, please i want the step by step procedure on how to achieve this either  from  cli or gui but preferable gui.

 

Thanks

External Moderator
Posts: 5,261
Registered: ‎02-23-2004

Re: Active / Standby configuration on brocade 300

@Taiwo

 

there are no Active/Standby configuration Procedure.

 

you can create a single fabric with TWO or more Switches or a Dual Fabric.

 

Both, are active and not in Standby.

TechHelp24
Occasional Contributor
Posts: 17
Registered: ‎08-18-2017

Re: Active / Standby configuration on brocade 300

Thanks, so what do you advise i do in my case. I actually shutdown the brocade switches due to an issue that we had with some servers within the DC. But i knew that before the brocade switches were shutdown, one of the brocade switches was having an amber light on it  while the other brocade switch was having green light on it. I want to get it to how i met it. I observed that after bringing the switches on, they are both showing green lights.

 

 

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.