Ethernet Switches & Routers

Reply
Highlighted
Occasional Contributor
Posts: 5
Registered: ‎11-21-2017
Accepted Solution

creating lag 'name' dynamic throwing error

[ Edited ]

Read the manual and watched the video...  Step one create the lag, and I get a failure. This is on an ICX7150, SPR 08061a.bin Version:08.0.61aT213

 

 

Brocade Annex(config)#lag ToMain dynamic
Error: can't find LAG with name ToMain
Brocade Annex(config)#

 

Any thoughts?

 

 

Broadcom
Posts: 31
Registered: ‎12-23-2011

Re: creating lag 'name' dynamic throwing error

The command to create the lag needs to indlude the LAG ID, for example

 

Switch(config)#
Switch(config)#lag ToMain dynamic id auto
Switch(config-lag-ToMain)#

 

To get back to the LAG configuration later you don't need the LAG ID

 

Switch(config)#
Switch(config)#lag ToMain
Switch(config-lag-ToMain)#

 

 

 

Frequent Contributor
Posts: 137
Registered: ‎07-20-2015

Re: creating lag 'name' dynamic throwing error

You also no longer need to specify the deploy keywords or the primary port.

 

Simply seelct the ports you want to be a member for example

 

conf t

lag ToMain dynamic id auto

Switch(config-lag-ToMain)#ports ethe 1/1/1 ethe 1/1/2

 

Whatever works.

 

Then if you want to use it as a trunk, add it as a tagged interface on a VLAN, and it will carry taht VLAN as an 802.1q trunk.

 

 

vlan 123 name SOMETHING  by port
tagged lag 1

!

 

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook