Ethernet Switches & Routers

Reply
New Contributor
Posts: 2
Registered: ‎01-13-2013

SX800 Router Code Issue

Hello, I am currently running SXL07400 Router code on a SX800. However, it only appears to support RIP and VSRP, why doesn't it support OSPF or any of the other protocols? Thanks!

Contributor
Posts: 61
Registered: ‎12-08-2009

Re: SX800 Router Code Issue


You need SXR07400  code. the management module also needs to be PREM.

telnet@SX800E#sh ver

Active Management CPU :

  SW: Version 07.3.00T3e3 Copyright (c) 1996-2011 Brocade Communications Systems, Inc.

      Compiled on XXXXXXXXX

      (4407439 bytes) Primary SXR07300.bin

      BootROM: Version 05.0.00T3e5 (FEv2)

      Chassis Serial  #:XXXXXXX

         License: SX_V6_HW_ROUTER_IPv4_SOFT_PACKAGE    (LID: XXXXXXXXXX)

  HW: Chassis FastIron SX 800-PREM (PROM-TYPE SX-FIL3U-6-IPV4)

==========================================================================

Standby Management CPU :

  SW: Version 07.3.00T3e3 Copyright (c) 1996-2011 Brocade Communications Systems, Inc.

      Compiled on XXXXXXX

      BootROM: Version 05.0.00T3e5 (FEv2)

  HW: Chassis FastIron SX 800-PREM (PROM-TYPE SX-FIL3U-6-IPV4)

hope this helps

Frequent Contributor
Posts: 118
Registered: ‎06-15-2009

Re: SX800 Router Code Issue

As Serhat mentioned above, you need the PREM license to be installed in the SX800 management modules & the following features will be supported .

• 6,000 active host routes

• Anycast RP

• BGP4

• DVMRP V2

• IGMP V1, V2, and V3

• ICMP redirect messages

• IGMP V3 fast leave (for routing)

• MSDP

• OSPF V2

• PIM-DM

• PIM-SM

• PIM passive

• Policy-based routing

• RIP V1 and V2

• Route-only support

• Route redistribution

• VRRP-E

• IPv4 over GRE

• Multicast over GRE

thanks,deepti

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook