Ethernet Switches & Routers

Reply
N/A
Posts: 1
Registered: ‎09-11-2013

Problem with stacked ICX switches and SNMP monitoring

I use multible stacks of ICX6450 (SW: Version 07.4.00dT7f3) and 6610 switches an cant monitor (Zabbix) them correctly even if i use the MIBs from the "IPMIB_Reference_Jun2013" .

Here an example:

This is waht i expect ... a stack with 4 units

$ snmpwalk -c public -v 1 10.XXXXXXXXX 1.3.6.1.4.1.1991.1.1.2.2.2.1.3

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.1.1 = STRING: "ICX6450-24 24-port Management Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.1.2 = STRING: "ICX6450-SFP-Plus 4port 40G Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.2.1 = STRING: "ICX6450-48 48-port Management Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.2.2 = STRING: "ICX6450-SFP-Plus 4port 40G Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.3.1 = STRING: "ICX6450-48 48-port Management Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.3.2 = STRING: "ICX6450-SFP-Plus 4port 40G Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.4.1 = STRING: "ICX6450-48 48-port Management Module"

SNMPv2-SMI::enterprises.1991.1.1.2.2.2.1.3.4.2 = STRING: "ICX6450-SFP-Plus 4port 40G Module"

This what i get when i walk over the same stack and look for the "Power supply description"

$ snmpwalk -c public -v 1 10.XXXXXXXXX 1.3.6.1.4.1.1991.1.1.1.2.2.1.3

SNMPv2-SMI::enterprises.1991.1.1.1.2.2.1.3.1.1 = STRING: "Power supply 1"

SNMPv2-SMI::enterprises.1991.1.1.1.2.2.1.3.1.2 = STRING: "Power supply 2"

Any Idea ... Id like to monitor at least:

CPU

Mem

Power supplys

Fans

Traffic

Thanks for your input

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Problem with stacked ICX switches and SNMP monitoring

Hi Bernd,

     I had a look through the MIB reference but was unable to see what you need when in stacked mode. 

You could use this SNMP OIDs on FastIron(for non stack - do not know if they are the same for stacked as well):

-thinking slot number could also work for memeber of stack?

CPU Util

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.slot#.1.1            1sec interval

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.slot#.1.5            5sec interval

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.slot#.1.60          60 sec interval

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.slot#.1.300        300 sec interval

e.g. for a FastIron SX800/1600 slot#=9

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.9.1.1            1sec interval

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.9.1.5            5sec interval

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.9.1.60          60 sec interval

.1.3.6.1.4.1.1991.1.1.2.11.1.1.5.9.1.300        300 sec interval

Memory Util

.1.3.6.1.4.1.1991.1.1.2.1.53.0

Interface statistics

Use standard MIB-2 OIDs like Interface IfInOctets or IfOutOctets,

Also you could downlaod the trail version of BNA and installl that to see what SNMP OID Brocade are using in their management platform.

Thanks

Michael.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook