Ethernet Switches & Routers

Reply
New Contributor
Posts: 2
Registered: ‎05-20-2015
Accepted Solution

Port Mirroring assistance on a brocade core switch

Hi all,

 

Model: ICS6450-48P

ver 07.4.00bT313
!
stack unit 1
module 1 icx6450-48p-poe-port-management-module
module 2 icx6450-sfp-plus-4port-40g-module

  I am new to brocade and  trying to setup port mirroring on the brocade core switch to copy the voice traffic which is flowing between the port 1/1/7 and cisco cube to the ethernet port 1/1/9, and then verified using wireshark in the pc which connected to port 1/1/9, however i couldn't see any voice traffice.   Is this configuration is sufficient, if yes can I verify this port-mirroring on the switch.

 

mirror-port ethernet 1/1/7

 

interface ethernet 1/1/9
mon ethe 1/1/7 both

 

Thanks for your assistance on this case.

 

Frequent Contributor
Posts: 95
Registered: ‎03-23-2015

Re: Port Mirroring assistance on a brocade core switch

Hi @kmj_005,

 

To verify the configuration you should be able to run:

 

"show monitor config"

 

Hope this helps.

Dennis Smith
Manager Brocade Communities
@DennisMSmith
New Contributor
Posts: 2
Registered: ‎05-20-2015

Re: Port Mirroring assistance on a brocade core switch

Hi Dennis,

 

    Thanks for your reply, i found the issue, once i changed the monitor port and mirror ports vice versa, it starts working.

 

Thanks

Frequent Contributor
Posts: 95
Registered: ‎03-23-2015

Re: Port Mirroring assistance on a brocade core switch

Awesome! Thanks for posting back

Dennis Smith
Manager Brocade Communities
@DennisMSmith

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook