Ethernet Switches & Routers

Reply
N/A
Posts: 1
Registered: ‎02-12-2013

Newby with 6450 24P

Approximately 2 months ago, we were sold and had installed a 6450 and two 6430.  The 6450 was setup as a DHCP server.  Recently, now 2 PCs, are saying duplicate IP address upon bootup.  All equipment rebooted as well.  No rogue DHCP servers. I've been having trouble finding any documentation on the DHCP server.  Actually, have only found one sales document which even says the 6450 has a DHCP server.  No luck in browsing the web interface for the DHCP server either.  Installer is no longer available.  Can anyone point me in the right direction?  Thanks.

Brocadian
Posts: 7
Registered: ‎05-27-2010

Re: Newby with 6450 24P

Hi alicea,

connect to the switch using Telnet or console port and enter priviledged mode (enable).

Now you can enter the following commands on the command line interface (cli):

show ip dhcp-server binding

show ip dhcp-server flash

or show run

in order to check the status of the dhcp server of the switch.

Regards,

Stefan

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Click to Register
Download FREE NVMe eBook