For more details, please see ourCookie Policy.

Ethernet Switches & Routers

Need brocade command

by j.khan on ‎06-05-2013 03:51 AM (3,648 Views)

Dear Support,

We are replacing Cisco with brocade access switches, the version of ICX-switch is Version 07.4.00aT311.

Please send me the guide, how i configure it over brocade switch. Following are the cisco command, send me it on the urgent basis.

no service pad

service tcp-keepalives-in

service tcp-keepalives-out

service timestamps debug datetime msec localtime show-timezone

service timestamps log datetime msec localtime show-timezone

service password-encryption

security authentication failure rate 10 log

security passwords min-length 6

ip subnet-zero

no ip source-route

no ip gratuitous-arps

ip options drop

no ip domain-lookup

no ip http server

no ip http secure-server

ip domain-name <domain name>

login block-for 120 attempts 3 within 60

login delay 5

login on-failure log

login on-success log

vtp domain <domain name>

vtp mode transparent


on ‎06-05-2013 04:41 AM

Hello J.Khan.

There are detailed configuration guides available in your MyBrocade login.

There are also Cisco Brocade CLI comparison documents within the communities.

You could use "search".

Furthermore Brocade offers good trainings and Brocade partner should be able to support you on your configurations.


on ‎06-05-2013 04:46 AM


you should create a Thread and not a DOC.

by j.khan
on ‎06-05-2013 04:57 AM

can you tell me on thing, In cisco we have vtp domain.

Over brocade we have any configuration like this.


on ‎06-05-2013 05:05 AM

No VTP with Brocade!

Only standard GVRP.... not really practical

on ‎06-05-2013 09:46 AM


As Karl mentioned , we support GVRP. Here is the link to GVRP configuration steps from the config guide. You can find it on ; then select  the ICX switch model. Scroll down, under DOCUMENTATIONS, you will find the respective cfg guide