06-02-2016 05:21 AM
Hi , Im new to brocade .
im having a ICX7450 , Running with SPR08040a.bin and L3 premium license.
im having trouble doing intervlan routing .
Solved! Go to Solution.
06-02-2016 12:54 PM
You don't mention what problems you are having. To do interVLAN routing it should just be a case of creating the VLANs and assigning ports to them. Either as untag for access ports, or tag for uplinks or 802.1Q ports
untag eth 1/1/1
tag eth 1/1/2
Once you have this you will need to add a ve (virtual ethernet) interface into the VLAN
router-interface ve 100
The ve number (in this case 100) does not have to match the vlan number, but it helps to keep track
Now you need to add the IP parameters to the newly created ve
int ve 100
ip address 192.168.253.1/24
repeat for other vlans
To provide first hop gateway resilience, you can configure vrrp or vrrp-e on the ve as you would do on a physical interface.