Ethernet Switches & Routers

Reply
New Contributor
Posts: 2
Registered: ‎05-13-2008

Help to config SFP port on FastIron WS 624G ??????????

Hi all!

I have 02 FastIron WS  624G (it have 4 moduls SFP, i installed one E1MG-SX on each  switch). I used the patch  core (LC - LC 50/125) to connect them. That  connect between two  WS624G , on two switchs had the blue SFP port light . I want to configurate trunking on that SFP  port.
But when i typing show interface brief

FWS624G Router#sh  interf  br

Port   Link       State     Dupl Speed   Trunk Tag P   MAC              Name        
0/1/1    Up       Forward   Full   100M    None  No  l   0024.380d.3340               
0/1/2  Up         Forward   Full 100M    None  No  l   0024.380d.3341               
0/1/3  Up         Forward   Full 1G      None    No  l   0024.380d.3342               
0/1/4  Down       None      None None    None    No  l   0024.380d.3343               
0/1/5  Up         Forward   Full 1G      None    No  l   0024.380d.3344               
0/1/6  Up         Forward   Full 100M    None  No  l   0024.380d.3345               
0/1/7  Up         Forward   Full 1G      None    No  l   0024.380d.3346               
0/1/8  Up         Forward   Full 100M    None  No  l   0024.380d.3347               
0/1/9  Up         Forward   Full 1G      None    No  l   0024.380d.3348               
0/1/10 Up       Forward     Full 100M    None  No  l   0024.380d.3349               
0/1/11 Up       Forward     Full 1G      None  No  l   0024.380d.334a               
0/1/12 Up       Forward     Full 100M    None  No  l   0024.380d.334b               
0/1/13 Down       None      None None    None    No  l   0024.380d.334c               
0/1/14 Down       None      None None    None    No  l   0024.380d.334d               
0/1/15 Up       Forward     Full 1G      None  No  l   0024.380d.334e               
0/1/16 Up       Forward     Full 100M    None  No  l   0024.380d.334f               
0/1/17 Up       Forward     Full 100M    None  No  l   0024.380d.3350               
0/1/18 Up       Forward     Full 1G      None  No  l   0024.380d.3351               
0/1/19 Up       Forward     Full 100M    None  No  l   0024.380d.3352               
0/1/20 Up       Forward     Full 1G      None  No  l   0024.380d.3353               
0/1/21 Down       None      None None    None    No  l   0024.380d.3354               
--More--, next page: Space, next line: Return key, quit:   Control-c                                                                    0/1/22 Down     None      None   None    None  No  l   0024.380d.3355               
0/1/23 Up       Forward     Full 100M    None  No  l   0024.380d.3356               
0/1/24 Up       Forward     Full 100M    None  No  l   0024.380d.3357               
FWS624G Router#

FWS624G Router# sh version
   SW: Version 04.3.01T7e3 Copyright (c) 1996-2008 Foundry Networks,   Inc.
      Compiled on Nov 13 2008 at 23:20:46   labeled as FGR04301
      (3699476 bytes) from   Primary FGR04301.bin
      BootROM: Version   05.0.00T7e5 (FEv2)
  HW: Stackable FWS624G (PROM-TYPE   FWS624-EL3U)
==========================================================================
STACKID 0: SL 1: FastIron WS 624G 24-port Management Module
       Serial  #: AN09190077
       P-ASIC  0: type D814, rev 01
==========================================================================
   400 MHz Power PC processor 8248 (version 130/2014) 66 MHz bus
   512 KB boot flash memory
30720 KB code flash memory
  256   MB DRAM
The system uptime is 2 days 4 hours 17 minutes 31 seconds
The   system : started=cold start 

WS624G   Router(config)#link-config
  gig    GiG Link
   x10g   10G Link
FWS624G Router(config)#link-config gi
   gig    GiG Link
FWS624G Router(config)#link-config   gig
  copper   Copper Port
FWS624G   Router(config)#link-config gig   copper       
    copper   Copper Port



not have command
link-config gig fiber


Where is SFP  interface???
Please help me!!!!!!!!

Thanks!

Occasional Contributor
Posts: 8
Registered: ‎08-04-2009

Re: Help to config SFP port on FastIron WS 624G ??????????

Hi,

The sfp Interface is shared with ethernet port 1 to 4. the sfp port 1 is interface ethernet 1. you can use only one port at a time (eg either the copper port or SFP Port). if you configure trunk option on ethernet port 1 it will also apply to SFP port 1 as it is shared.

Regards

sandeep

New Contributor
Posts: 2
Registered: ‎05-13-2008

Re: Help to config SFP port on FastIron WS 624G ??????????

Thanks Sandheep!

Your comment helped me to resolve my problems.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook