Ethernet Switches & Routers

Reply
Visitor
Posts: 1
Registered: ‎01-26-2016

HELP WITH VRF CONFIG ON ICX6610!!!

I am trying to configure a vrf on a ICX 6610 but every time I try to do "address-family ipv4" command, I get the error below.

 

6610(config-vrf-ICS)#address-family ipv4

Error: has reached maximum system limit of maximum number of IPv4 routes

       available IPv4 routes for non-default VRF 0

 

I currently do not have any vrf configured on the switch so I am not sure why it gives the error. Below is the config I tried to implement.

 

vrf RED

rd 10.0.0.0:0         

address-family ipv4

exit-address-family

exit-vrf

 

ICX6610-24F 24-port Management Module

Version 08.0.10gT7f3

 

 

 

Contributor
Posts: 37
Registered: ‎02-27-2015

Re: HELP WITH VRF CONFIG ON ICX6610!!!

Hi Sule,

 

You should descrease the value of "Max IPv6 routes for default VRF"

Router(config)#system-max ip6-route-default-vrf 64

 

And then you can increase Max IP routes value which includes Default and Non-Default VRF.

Router(config)#system-max ip-route 15168

 

Now you can enter ipv4 part of a non-default vrf:

Router(config)#vrf testVrf

Router(config-vrf-testVrf)#address-family ipv4

Router(config-vrf-testVrf-ipv4)# 

 

I hope this helps.

--
Best Regards
Destan YILANCI

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook