01-22-2016 01:26 PM
I'm having issues getting a ubiquiti WAP to work. It's currently plugged to a Cisco 3560 with the following config. I'm trying to move it over to an ICX-7240
switchport trunk encapsulation dot1q
switchport trunk native vlan 30
switchport mode trunk
The WAP has an IP of 10.11.30.x (in Vlan 30) so I'm trying to set that traffic as untagged. Then I'm trying to also have be able to send VLAN 201 and 201 both tagged. This is the Public and Private WiFi VLans.
01-24-2016 07:16 AM
Have you tried to remove 'switchport trunk native vlan 30' on a 3560 and on a 7240 add the port as untagged for VLAN 30 and tagged for other two VLANs?
01-24-2016 10:54 AM
What is your Brocade config?
You should do something like these:
Brocade#(config-vlan-30)#tagged ethernet 1/1/25
Brocade#(config)#interface ethernet 1/1/25
We use dual-mode string for native vlan.