07-29-2014 06:12 AM
i have an Problem to active the unused 10 Gbit Ports of one stack member.
I know that i have to had an license to use 10 Gbit.
so I set
but the Port still "stuck" as err-dis.
Normally it should get status down.
Thanks and regards.
Solved! Go to Solution.
07-30-2014 09:35 AM
Found the reference actually, as a bug, should be fixed in 7400a and above.
ICX6450 port 1/2/2 and 1/2/4 configured for 1G requires reload to come up
ICX6450 port 1/2/2 and 1/2/4 configured for 1G do not come up and stays in the ERR-DISABLE state.
Reload the switch to bring up port 1/2/2 and 1/2/4 when configured for 1G
FI Embedded Management
Reported In Release:
Service Request ID: